Harlequin 650ITE

Fully bunded, Harlequin's ITE/ITT bunded tanks are complete with an electronic contents gauge and a fitting kit. This bunded tank is fully compliant with all applicable fuel storage requirements and suitable for the storage of Heating Oil. They can be used for above ground oil storage installations at domestic, industrial, agricultural, commercial and institutional premises. ITE bottom outlet tanks and ITT for top outlet tanks.

Nominal Capacity: 645 litres
Length: 1,715 mm  Width: 670mm  Height: 1,335 mm  
Weight: 105 kg

All Harlequin ITE/ITT Bunded Tanks are supplied complete with:

  • 2" Lockable Fill Point
  • 4" Lockable Inspection Point
  • Lockable Manhole Access
  • 1"BSP(F) Outlet Connection
  • Vent
  • Electronic Contents Gauge
  • Bottom outlet tanks complete with 1 to .05" reducer, isolation valve, filter, 0.5" to 10mm connector, ptfe tape & sealant 
  • Top outlet tanks complete with suction line, non return valve, filter, anti-syphon valve, compression fitting
  • LRC Overfill Prevention Probe

Harlequin tanks are CE marked,  manufactured from medium density polyethylene in the United Kingdom and have a 10-year warranty.


This Harlequin bunded 650ITE must be installed and maintained by a suitably competent person in accordance with the requirements of British Standard BS5410; OFTEC Technical Instruction Book 3; Supplied Instructions; All prevailing statutory requirements eg Buildings Regulations & Environmental Regulations.


Prices quoted include delivery to mainland UK. Tail lift delivery are available for tanks up to 2500 litres, if a tail lift is required please specify when ordering. Other deliveries will be made by an articulated lorry and it is the customers responsibility to ensure adequate access plus offloading. Offloading of heavy items should be made by forklift or similar lifting equipment. If there is any doubt about delivery access or offloading please contact us to discuss options available. Please allow approx. 5 days for delivery.


 The Harlequin range of Bunded Oil Tanks are available from 350 litres, up to 10,000 litre models.  Each tank has been designed and manufactured to exceed the most technical, environmental and regulatory requirements.  Available as a tank only HQi model, tank and tankpack ITE model, or top outlet ITT model. 

A ‘Bunded’ oil tank simply consists of a tank within a tank.  Oil is stored in the inner tank and the outer tank acts as a failsafe so that in the event of a spillage, excess oil will collect in the outer tank - thus averting a pollution incident and costly environmental clean-up operation.

Benefits of a Harlequin Bunded Oil Tank: 


More Options - the full range has 14 options of tank size, a tank to suit every installation requirement.  


Integrally Bunded - designed to protect the surrounding environment, all tanks are bunded preventing pollution if the internal tank was ever to leak.  


Non Corrosive - manufactured from Medium Density Polyethylene (MDPE) your Harlequin tank will not corrode. 


10 Year Guarantee - peace of mind that should an issue arise with your tank, Harlequin will be there to help. *10 year guarantee upon registration with Harlequin.   


Meets Regulations - as well as being fully bunded, each tank meets all relevant regulatory requirements. 


Contents Monitoring - each model has a 32mm hole suitable for fitting an electronic gauge. Gauge is standard with ITE and ITT models.

Write a review

Note: HTML is not translated!
    Bad           Good

Harlequin 650 Litre ITE Bunded Tank

  • Brand: Harlequin
  • Product Code: 650ITE
  • Availability: In Stock
  • £1,533.60

  • Ex VAT: £1,278.00

Available Options

Tags: Harlequin Oil Tank 650 ITE